/* **Your warranty is now void.** * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. * */
Resurrection Remix N
This rom is for D838 variant, maybe works on others, but I have not tested.
Working:
-Wifi
-Ril
-Camera (rear, front, video)
-Sound
-SDCard
-DT2W (Double tap to wake)
-Bluetooth
-NFC
Bugs:
-Tell me
LineageOS 14.1
Working:
-same as RR N
Bugs:
-same as RR N
Installation:
-same as RR N
1. MAKE BACKUP!!!
2. Push baseband , ROM and gapps to sdcard (copy cm13 zip and LP Baseband to sd card)
3. Make WIPE dalvik, data,cache(from recovery)(advanced wipe in twrp)
4. Install lollipop baseband
5. Install ROM
6. Install gapps
Additional links:
KK Baseband and kernel - https://yadi.sk/d/nVx3rb7MpheN9
LP Baseband and kernel(bumped)+KK bootloader - https://yadi.sk/d/_hz4jdQhpheNn
How to Restore previous ROM:
1. if you have KK based Rom - flash KK Baseband and restore ROM from Recovery
2. if you have LP based Rom - flash LP Baseband and restore ROM from Recovery
How to install twrp on kitkat:
1. You need ROOT
2. Download and install this apk: https://drive.google.com/file/d/0B4k...ew?usp=sharing
3. Download updated TWRP zip and put to internal storage or sdcard: https://drive.google.com/file/d/0B0L...poTDBfTUE/view
4. Open installed app, grant root access, flash recovery
5. Reboot into recovery (via apk or power off phone, press power and volume down button until lg logo come up, release buttons for one second than press volume up and volume down, select yes and again yes. This will not erase your memory if you have TWRP flashed)
6. Flash updated TWRP
7. Reboot into recovery again
How to install TWRP on lollipop:
1. Need ROOT
2. Download and install LG drivers from here : https://drive.google.com/file/d/0B4k...ew?usp=sharing
3. Download and extract this files: https://drive.google.com/file/d/0B4k...ew?usp=sharing
4. Enable usb debugging under developer options
5. Connect phone to pc via MTP
6. Run d838recovery.bat (You will see chinese language, just press any button to flash recovery)
7. Allow usb debugging and grant root access
8. DO NOT REMOVE USB CABLE
9. After finishing process press any key to reboot into TWRP recovery